Every Sodick’s injection moulding machine comes with two-stage plunger injection system (V-LINE® System) which is designed on three critical principles: consistent plasticizing heat profile, constant filling volume and constant holding pressure. These principles work in perfect harmony to achieve ultra-precision injection moulding.
Electric clamping action
With the servo motor drive and adoption of the mould clamping device by the original toggle link mechanism shortened the mould opening and closing cycle. The movable platen is supported by a linear guide to improve the stability of the mould orientation. The power design for these products significantly reduces power usage while contributing to quieter operation.
Operation panel focused on intuition
Offering selector type switches, the control panel has been developed especially for the MS100. The ability to move the switches in the same direction in which you want each unit to move results in a more intuitive operating experience and helps simplify moulding operations.
- RJG EDART interface
- Pneumatic core tractor connection circuit and drive unit (Solenoid valve, select from 1/2 channels)
- Hydraulic core tractor connection circuit and drive unit (Solenoid valve, select from 1/2 channels)
- Hot runner temperature control connection circuit (2kW/ 2 circuits)
- Mold (hot runner) temperature monitoring thermocouple connection circuit
Brochures & Downloads
|Max. clamping force (kN)||980|
|Tie bar distance (W x L, mm)||460 x 420|
|Platen dimension (mm)||640 x 610|
|Open daylight (mm)||800|
|Min./ Max. die height (mm)||200 / 450|
|Max. weight of tool (kg)||600|
|Screw diameter (mm)||28||32||40|
|Plunger diameter (mm)||28||40|
|Max. injection specific pressure (MPa)||215||285||160||215|
|Max. injection rate by volume (cm3/s)||246||185||339||251|
|Max. injection stroke (mm)||160||200|
|Machine dimensions (L x W x H, mm)||4,240 x 1,215 x 1,748|